Versions

Model	ArtNo.	Weight g/item	Measurements l x w x h (mm)	Colours	Model	Surface	DC-resistance/ kOhm	Finish	Model
10/95	747	7	67x2,2x2,2		For Bridge Mounting			German Silver	With Bushing, Jack and Pin
10/95S	747S	5	67x2,2x2,2		For Bridge Mounting			German Silver
10/95S-1	7470S	33	67x2,2x2,2		With Bushing and Jacks			German Silver	With Bushing and Jacks
2000	7495	14	82x9,6x11					Satinized
3000	7496	7	74,3x3,2x9,7		With Pickup 747			Satinized

Technical drawing

To view the complete technical drawing, please use the download file.

• TZ Piezo Pickup 2000

Note: Acrobat Reader is required to view PDF files correctly!

User instructions

To view the complete user instructions, please use the download file.

• BA 747_d
• BA 747_e

Note: Acrobat Reader is required to view PDF files correctly!

Installation instructions

To view the complete installation instructions, please use the download file.

• TA-EB Allgemeine Erklärungen für Schaller Pickups und Schaltungsmöglichkeiten (Instructions and wiring)

Note: Acrobat Reader is required to view PDF files correctly!

Downloads

User instructions

• BA 747_d
• BA 747_e

Technical drawing

• TZ Piezo Pickup 2000

Installation instructions

• TA-EB Allgemeine Erklärungen für Schaller Pickups und Schaltungsmöglichkeiten (Instructions and wiring)

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.

Humbucking Pickups

All of our single-pole Humbucker pickups are built to fit in any common frame.
Our frames provide mounting with four height adjustment screws to prevent tilting. When winding the coils we pay special attention to the precise matching of each pair of coils – essential for ensuring 100% humbucking function.
As with our single-coil pickups, all Humbucker coils are soaked in a special process
to minimize microphone feedback.
The single-pole Humbuckers offer variable pole piece spacing at neck and bridge pickups, which permits full use of the magnetic field.
All pickups are available in Cream, Black or Cream Black (Humbuckers only).

Kinds of Strings

Steel strings can be used with all pickpus.
The following table shows which pickups can also be used with nylon/gut strings:

Our zither pickups with the article numbers 408 and 412 are designed for steel strings. If you wish to use nylon strings, please order article number 409, which is our piezo pickup for zither.

Using the product catalog

Please change your print settings to landscape before printing these pages so that the guidelines are complete and readable.

FAQ